 |
 |
User guides- 4606 IP Telephone
|
 |
4606 IP Telephone DescriptionUsing the Display Screen3 IntroductionThe DEFINITY® 4606 IP Telephone has a 2-line by 16 character display (screen) area located at the top third of the phone. What you see on the display is controlled by the current status of the phone or by selections you make using Line/Feature buttons, Access Codes, or dedicated feature buttons like Redial or Transfer. The 4606 IP Telephone’s display:
About the Display ScreenThe two display lines provide (general) information (time of day), feature information/instructions, and/or call information. Upper Display LineThe Time and Date appear on the upper display line when the phone is idle. Time and date are set at the switch, so if there is an error, contact your Telephone System Administrator. When plugging in your 4606 IP Telephone for the first time, or after a power outage, it may take several minutes for the time and date to appear on the display screen. Lower Display Line Line/Feature Button InformationLine/Feature button information identifies the line being used. Each of the six Line/Feature buttons is given an alphabetic designation of a through c (left column) and d through f (right column). When the display shows a=, it represents call information for the first Line/Feature button; the next button down would show as b=, and so on. Line/Feature buttons are also called "call appearance" buttons. Call InformationCall information, such as the extension being dialed or the name and extension of the person you are calling, displays. When someone on another extension calls you, the display shows the caller’s name. Outside calls show either the telephone number, the words OUTSIDE CALL, or a trunk identifier.
|